| 0662-S12, 0662-S1D, 0662-S1W |
| Mechanical data |
| |
| Dimensions |
| Height |
1.00 in (25.4 mm) |
| Width |
4.00 in (101.6 mm) |
| Length |
5.75 in (146.0 mm) |
| Weight |
1.0 pounds (0.46 kilograms) |
| |
| Clearances |
| |
| A minimum of 2 mm clearance should be given to the bottom surface except for a 10 mm
diameter area around the bottom mounting holes. For proper cooling it is suggested that
a clearance of 6 mm be provided under the drive and on top of the file. |
|
| Mounting |
The drive can be mounted with any surface facing down. The drive has both side and
bottom mounting holes. The maximum allowable penetration of the mounting screws is
3.8 mm. |
| |
 |
 |
|
Note: Except for the isolated mounting holes the disk enclosure is not at
ground potential.
|
| |
|
|
|
