Mounting orientation |
The drive will operate in all axes (6 directions). The drive will operate within
the specified error rates when tilted +/-5 degrees from these positions.
|
Performance and error rate will stay within specification limits if the drive is operated in the other permissible
orientations from which it was formatted. Thus a drive formatted in a horizontal orientation will be able to run vertically and vice versa.
|
The drive must be securely mounted in the system to prevent motion or vibration
during a seek operation or spindle rotation using appropriate screws or equivalent mounting hardware.
|
 |
 |
 |
| The recommended mounting screw torque is 3 +/- 0.5 kgf.cm. The
recommended mounting screw depth is 3.0 +/- 0.3 mm for bottom and 3.5
+/- 0.5 mm for horizontal mounting. |
| |
