DK31AH-36LC/DK32AH-18(-91)LCJumper socket installation
SCA-2 LVD 80pin-16bits
Jumper Connector Layout (SCA-2 LVD 80pin-16bits)
| Pin No |
1-2 |
3-4 |
5-6 |
7-8 |
11-12 |
13-14 |
15-16 |
17-18 |
| Function |
ID3(8) |
ID2(4) |
ID1(2) |
ID0(1) |
Reserved |
Force SE bus mode |
Reserved |
LED |
| Pin No |
19-20 |
21-22 |
23-24 |
25-26 |
27-28 |
29-30 |
31-32 |
| Function |
Write Protect |
Delayed Spindle
Start |
Reserved |
Reserved |
Reserved |
Force CMD start |
Reserved |
- Do not change the reserved jumper pins! Changing
will void the warranty!
Spare jumpers installed C3: 2-4,6-8,12-14,20-22&28-30
can be used for another setting.
|
|
DK31AH-36(LC) |
DK32AH-18(-91)(LC) |
| Formatted Capacity * (Gbytes) |
36.8 |
18.4(9.2) |
| Bytes per Sector * |
512 |
| #Cylinders * /#Heads/#Disks |
11767/20/10 |
11767/10/5(11767/5/3) |
| Maximum LBA * (Hex) |
44DC47F |
226E23F(112B27F) |
| Seek Time:Average(Read/Write)(ms) |
6.8/7.8 |
6.5/7.5 |
| Spindle Speed(rpm) |
7208 |
| SCSI Interface Type |
fast/fast20(Ultra)/fast40(Ultra-2) |
| Transfer Rates:Async/Sync/Fast/Ultra/Ultra-2(Mbyte/s) |
5.0/10.0/20.0/40.0/80.0 |
| Operating Temperature(Celsius/Fahrenheit) |
5-50 °C / 41-122 °F |
| Power: 12V peak(Typ.) / 5V peak(Typ.)(A) |
2.5/1.5 |
2.0/1.5(1.9/1.5) |
| Start Time(s) |
20 |
18(15) |
| * : Indicates Specifcation for
Default Setting of 512 Bytes/Sector. |
| Installation Tips: |
- Installation horizontal or vertical.(6 direction)
- Provide adequate air flow to cool drive
- Use 4 mounting screws[6X32 UNC].
Maximum screw penetration:3.8mm(0.15in)into drive.
|
-
|
|
|
