Travelstar 3LP
Mechanical data
Models: DMCA-21080 and DMCA-21440
| Dimensions |
21080 and 21440 |
| Height (mm) |
12.5 |
| Width (mm) |
69.85 |
| Length (mm) |
100.2 |
| Weight (gram) |
140 Max |
Mounting orientation
The drive will operate in all axes (6 directions). The drive will operate within the specified error rates when tilted +/-5 degrees from these positions.
Performance and error rate will stay within specification limits if the drive is operated in the other permissible orientations from which it was formatted.
Thus a drive formatted in a horizontal orientation will be able to run vertically and vice versa.
The drive must be securely mounted in the system to prevent motion or vibration during a seek operation or spindle rotation using appropriate screws
or equivalent mounting hardware.
Vibration and shock tests are to be conducted with the drive mounted to the equipment using the bottom four screw holes.
The recommended mounting screw torque is 3 +/- 0.5 kgf.cm. The recommended mounting screw depth
is 3.5 +/- 0.5 mm for bottom and 5.0 +/- 0.5 mm for horizontal mounting.
|
