Ultrastar 36ZX and 18LZX
Mechanical data
Models: DMVS-36, DMVS-18, and DMVS-9
| Dimensions |
DMVS-9 |
DMVS-18 |
DMVS-36 |
| Weight |
696 g /1.57lbs |
713 g /1.60 lbs |
1138 g /2.49 lbs |
| Height |
25.6 mm/ 1.008 in |
25.6 mm /1.008 in |
42 mm /1.63 in |
| Width |
101.85 mm / 4.00 in |
101.85 mm / 4.00 in |
101.85 mm / 4.00 in |
| Depth |
147.0 mm / 5.75 in |
147.0 mm / 5.75 in |
147.0 mm / 5.75 in |
Mounting holes
Note: Dimensions are in millimeters. Clearance = 7 mm.
Side mounting holes for Ultrastar 18LZX models
Side mounting holes for Ultrastar 36ZX
The recommended torque to be applied to the mounting screws is 0.8 +/-0.2 Newton-meters. Maximum allowable penetration of the mounting screws is 4.0 mm. Screws longer than 4.0 mm
may cause permanent damage to the drive
Connector locations
|
