Ultrastar 9LZX and 18ZX
Mechanical data
FC-AL models: DRVL-09L, 18L
| Dimensions |
Ultrastar 9LZX |
Ultrastar 18ZX |
| Height |
1.00 in./ 25.70 mm |
1.63 in./ 41.48 mm |
| Width |
4.00 in./ 101.60 mm |
4.00 in./ 101.60 mm |
| Length |
5.75 in./ 146.75 mm |
5.75 in./ 146.75 mm |
| Weight |
1.46 lb/ 0.66 kgm |
2.29 lb/ 1.03 kgm |
Mounting holes
Notes:
- Dimensions are in millimeters. Clearance = 7 mm.
- The recommended torque to be applied to the mounting screws is 0.8 +/-0.2 Newton-meters.
- Maximum allowable penetration of the mounting screws is 4.0 mm.
Screws longer than 4.0 mm may cause permanent damage to the drive.
40-pin FC-AL connector
|
|
|
